|
Fingertip Pulse Oximeter
The fingertip pulse oximeter is a pain-free, fast and easy way to measure the amount of oxygen in your blood and your heart rate. It's perfect for measuring your target heart rate while exercising, or can be used to check on little ones with respiratory problems/infections. The Fingertip Pulse Oximeter makes a useful gift for an athlete, new parent, respiratory illness sufferer or health care provider in your life!
Features: 1) Compact design and single button operation 2) LCD NightVision backlight display with 6 display modes 3) Displays SpO2, PR, bar graph and SpO2 waveform (pleth or line) 4) PR audio recognition function 5) Pulse signal strength 6) Low voltage indicator and rechargeable batteries 7) Ten levels of adjustable brightness and automatic power-off function
Product Operation Scope
The fingertip Oximeter can be used to measure human Haemoglobin Saturation and heart rate through finger. The product is suitable for use in family, hospital (including clinical use in internist/surgery, Anaesthesia, Pediatrics, Intensive Care and etc. ) Oxygen Club, social medical organizations, physical care in sports (It can be used before or after sports. Operation in sport procedure is not recommended) and etc. * The product is not suitable to monitor patient continuously.
General Description
Haemoglobin Saturation is percentage of Oxyhemoglobin (HbO2) capacity, compounded with oxygen, by all combinativable Haemoglobin (Hb) obin (HbO2) capacity in blood. In other words, it is consistence of Oxyhemoglobin in blood. It is a vary important ecological parameter for Respiratory circulation System. Many respiratory diseases can result in Haemoglobin Saturation being lowered in human blood. Moreover, the following factors can also lead to problems in oxygen supply, so that human haemoglobin saturation might be reduced: Automatic Organic Regulation Malfunction caused by Anesthesia, Intensive Postoperative Trauma, hurts resulted in by some medical examination and etc. In the situation, illnesses, such as light head, asthenia, vomit and etc, might happen to patients and even endanger the patient’s life. Therefore, it is very important to know Hemoglobin saturation of patient timely in clinical medical aspects. So that doctors can find problems in time.
The fingertip pulse oximeter features in small volume, low power consumption, convenient operation and being portable. It is only necessary for patient to put one of his(her) fingers into a fingertip photoelectric sensor for diagnosis, and a display screen will directly show measured value of hemoglobin Saturation. It has been proved in clinical experiments that it features in rather high precise and repeatability.
Measurement Principle
 Principle of the oximeter is as follows: An experience formula of data process is established taking use of Lambert Beer Law according to Spectrum Absorption Characteristics of Reductive hemoglobin(R Hb) and Oxyhemoglobin (O2 Hb) in glow and near-infrared zones. Operation principle of the instrument is Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning and Recording Technology, so that two beams of different wavelength of lights (660nm glow and 940nm near infrared light) can be focused onto human nail tip through perspective clamp finger-type sensor. Then measured signal can be obtained by a photosensitive element, information acquired through which will be shown on two groups of LEDs through process in electronic circuits and Microprocessor
Diagram of Operation Principle
-
Red and Infrared-ray Emission Tube
-
Red and Infrared-ray Receipt Tube
Specifications
- Display mode: Backlight LCD
- SPO2: Measurement range: 70-99% Accuracy: +-2% on the stage of 80%-99%; +-2% on the stage of 70%-80%;
- Pulse: Measure range: 30-235 BPM Accuracy: +-2 BPM or +-2% (larger)
- Pulse Intensity: Barograph Indication
- Power Requirements: Two AAA alkaline Batteries
- Battery consumption: Two AAA 1.5V, 600mAh alkaline batteries can be continuously used as long as 30 hours
- Dimension: Length: 58mm (2.28”) Width: 32mm (1.26”) Height: 34mm (1.34”)
- Weight: 50g (1.77 ounces) - including two AAA batteries
- A 24” carrying strap, suitable for wear around neck, with detachable lanyard included
Environment requirements
- Operation Temperature: 5-40C (41-95F)
- Storage Temperature: -10-40C (14-95F)
- Ambient Temperature: 15%-80% in operation, 10%-80% in storage
- Declaration: EMC of this product complies with IEC60601-1-1-2 standard
|
|
pulse oximeter, pulse oximeters, oximeter, oximeters, pulse, oximetry, rpo, oxygen saturation, heart rate
pulse oximeter, pulse oximeters, oximeter, oximeters, pulse, oximetry, rpo, oxygen saturation, heart rate
pulse oximeter, pulse oximeters, oximeter, oximeters, pulse, oximetry, rpo, oxygen saturation, heart rate
|
|